1. A device which does the functions of T-square set square, protractor and scale is called :
- Fasteners
- Mini-drafter
- Template
- Combination set
2. In the engineering system of paper sizes, A2 size is _____ .
- 841mm * 1189mm
- 594mm * 841mm
- 420mm * 594mm
- 210mm * 297mm
3. In a compass, lengthening bar is used to :
- Draw circles of large diameter
- Draw circle of uniform thickness
- Increase the overall height
- All of the above
4. In _______ is preferred containing the statement " ALL DIMENSIONS ARE IN MM" unless otherwise specified.
- Frame and Border
- Title block
- Item list
- Revision table
5. In orthographic projection, the xy is known as :
- Horizontal line
- Horizontal trace
- Reference line
- All of the above
6. True shape of the inclined surface of an object can be obtained on the :
- Horizontal plane
- Vertical plane
- Profile plane
- Auxiliary plane
7. In first angle projection method, the relative positions of the object, plane and observer are :
- Object is placed in between
- Plane is placed in between
- Observer is placed in between
- May be placed in any order
8. Objects that are symmetric can be shown effectively using this type of section ______ .
- Quarter section
- Half section
- Full section
- Symmetric section
9. Hidden lines are drawn as :
- Dashed narrow line
- Dashed wide line
- Long - dashed dotted narrow line
- Long - dashed dotted wide line
10. _______ is part of dimension.
- Centroidal line
- Extension line
- Cutting plane
- Line of symmetry
11. B.I.S. recommends the dimension value for diameter of a circle should be :
- Preceded by the symbol 'Φ'
- Suffixed by the symbol 'Φ'
- Preceded by the letter 'D'
- Suffixed by the letter 'D'
12. R.F. is always :
- <1
- =1
- >1
- Any of the above
13. The length of scale with R.F. 1/40 to measure upto 6 meters will be :
- 10 cm
- 12 cm
- 15 cm
- 20 cm
14. Pictorial views drawn on isometric scale are called _____ .
- Isometric drawing
- Isometric projection
- Isometric views
- All of the above
15. A square in a regular multi views projection appears in an isometric view as :
- Box
- Square
- Parallelogram
- Rhombus
16. The quick access toolbar contains :
- The tittle of the current drawing
- On line services and help button
- Tool for all five related options
- Set of navigation tool
17. Which of the following restricts the cursor movement of the specified incremental distance inside the drawing area?
- Grid mode
- Snap mode
- Ortho mode
- Polar tracking mode
18. The term used by most CAD system for rounding corner is :
- Chamfer
- Fillet
- Smooth
- Curve
19. Following instruments are needed for drawing of free hand sketching :
- Bow compass, scale, soft leaded pencil, eraser, sharpener
- Scale, soft leaded pencil, eraser, sharpener
- Soft leaded pencil, eraser, sharpener
- All of the above
20. If is easier and better to draw on ______ the isometric projections free hand sketch of object where orthographic view are given.
- Plain paper
- Graph Paper
- Grid Paper
- None of these
Engineering Graphics 2021 (Even)
Download Engineering Graphics 2021 question papers
Video lecture explanation
Click Here [uploading soon]
To Download Question Bank
